|
 |
| Specification |
|
AC SPECIFICATION |
|
|
| Motor |
¡@Shaded pole, or capacitance driven
¡@Impedance protected |
| Frame / Housing |
¡@Aluminum die-cast
¡@Painted black(AP) or
¡@Natural sanded and milled(AN) |
| Impeller |
¡@Glass reinforced thermoplastic, UL94V-0 |
| Bearing System |
¡@Two Ball or Sleeve |
| Dielectric Strength |
¡@1 min. at 1,500VAC, 50/60HZ |
| Operating Temperature |
¡@Ball bearing -20 ¢J ~+ 75 ¢J
¡@Sleeve bearing -10 ¢J ~+ 60 ¢J |
| Life Expectancy |
¡@Ball bearing 60,000 hours (L10)
¡@Sleeve bearing 30,000 hours (L10) |
| Safety Approvals |
¡@UL, CUL, TUV (except as noted) |
|
| |
| |
DC SPECIFICATION |
|
|
| Motor |
¡@Brushless DC,
¡@Impedance & polarity protected |
| Frame / Housing |
¡@Glass reinforced thermoplastic,
¡@PBT, UL94V-0 |
| Impeller |
¡@Glass reinforced thermoplastic,
¡@PBT, UL94V-0 |
| Bearing System |
¡@Two Ball or Sleeve |
| Insulation Resistance |
¡@Min. 10 M at DC 500V |
| Dielectric Strength |
¡@500VAC/1 sec. max. leakage
¡@500 micro amp. |
| Operating Temperature |
¡@Ball bearing -20 ¢J ~+ 80 ¢J
¡@Sleeve bearing -10 ¢J ~+ 50 ¢J |
| Life Expectancy |
¡@Ball bearing 70,000 hours (L10)
¡@Sleeve bearing 30,000 hours (L10) |
| Safety Approvals |
¡@UL, CUL, TUV (except as noted) |
|
|
|
| |
|
| |
|
|
